Ensure the service life of woodworking band saw blades

   1. The high-quality band sawing machine should be selected. Correct operation and adjustment of the machine tool is the most important factor in ensuring the service life of the woodworking band saw blade. Good machine rigidity and work performance can prevent the impact of vibration and various stresses on the woodworking band saw blade.

   2, to correctly choose the band saw blade you will use. No type of woodworking band saw blade is suitable for all sawing requirements, and various types and characteristics of saw blades have different effects. The choice includes suitable saw blade width, tooth profile and pitch.

   3, to correctly use the sawing parameters, mainly sawing line speed, feed rate and sawing band tension. Ideal chips for sawing materials should be tightly coiled, silvery and have a warm feel. For example, when sintering, brownish-blue, hypertrophy, powder, etc. are found, the relevant parameters need to be adjusted.

   4. The correct use of the cutting fluid and its mixture can lubricate and cool the woodworking band saw blade and instantly clean off the attachments on the saw teeth.

   5, the correct "run-in" new band saw blade, "run-in" is the natural wear through the sawtooth, remove the burr of the tooth edge, so that the woodworking band saw blade gradually into the normal sawing state, to avoid premature jagged to collapse and roll edge In particular, it is important when profiles, tubes, and shaped materials change rapidly in section. At the time of “run-in”, the machine parameters should be adjusted to about 50% of the normal sawing efficiency, and the sawing area is generally 200-600cm2. After no abnormal conditions, the relevant parameters of the machine tool are gradually adjusted to enter the normal sawing state.