Reasons for woodworking with a saw blade

  The woodworking band saw strip running strip shows up as a sudden run out or after the normal operation, and continues for a period of time, sometimes even falling off the saw wheel, causing an accident.

  The reasons for this problem are the following:

1, the cooling water is too large, or there is ice on the winter sawing wheel.

2. The cooling water is too small, causing pine oil or sawdust to stick on the saw wheel. As the saw blade does not adhere well, it causes the runner to run.

3, saw wheel wear is serious, due to prolonged wear, resulting in saw wheel deformation, the final run.

4, the next round of tilt led to the running strip, do not superstition suspending line when checking, because sometimes saw the body is not correct. The solution is; adjust the next round, if the front run, the next round of forward tilt. If you run backwards

5, bearing damage, showing the operation of noise, sawing machine vibration, due to the saw wheel can not run vertically, resulting in running.

6, woodworking saw blade cracking. It will also cause a run.

7, the degree of blade sawing, that is, arc is too small, can not even attached to the saw wheel, which swims run.

8. The saw machine's supporting part is inoperative, and it suddenly misaligned during operation, causing the upper wheel to tilt, resulting in a running strip.